What type of oil does a craftsman push mower take

The Craftsman 6.5 lawnmower is self-propelled, with the option to push using your own strength. With its mulching and bagging capability, this Craftsman mower uses a gas-powered engine that requires constant lubrication. To keep that engine in shape, you must choose the right type of oil and oil weight.

Table of Contents Show

Conventional Oil
Synthetic Oil
Oil Selection
Oil Viscosity
What kind of oil does Craftsman push lawn mower use?
Can I use 10W30 instead of SAE 30 in my lawn mower?
What kind of oil do you put in a push mower lawn mower?
Is SAE 30 the same as 10W30?

Conventional Oil

The Craftsman 6.50 rear deck mower uses a Briggs and Stratton engine, which is configured to accept conventional engine oil. Conventional engine oil is petroleum-based and often used in car engines as well. Conventional oil is relatively inexpensive, with the primary functions of lubricating engine parts, transferring heat away from them and keeping parts clean. The general drawback to using conventional oil is that it's inherently toxic, so you must dispose of it according to your local government’s environmental standards. Low-quality conventional oil also emits pollutants via your Craftsman’s exhaust system.

The Craftsman 6.5 lawnmower is self-propelled, with the option to push using your own strength.
The Craftsman 6.50 rear deck mower uses a Briggs and Stratton engine, which is configured to accept conventional engine oil.

Synthetic Oil

Synthetic oil is also acceptable for your Craftsman mower engine. Synthetic oil can cost three times as much as conventional oil. However, it lasts longer than conventional oil because it doesn’t burn up as quickly in high temperatures. You can also leave synthetic oil in your mower while it's being stored because there aren’t as many deposits and sediments as with conventional oil. One drawback of synthetic oil is that it doesn’t lubricate new or rebuilt engine parts as well as conventional oil.

Viscosity

Whether you use synthetic or conventional oil in your Craftsman mower, you must consider the oil’s viscosity rating. Viscosity measures the speed of the oil’s distribution at extreme temperatures. Colder engines require lower viscosity ratings for optimum startup, so engine parts spend less time wearing on each other without oil. Low-viscosity oils, by nature, are thinner for that reason. Operation in warmer temperatures benefits most from high-viscosity oils because they can withstand the heat without burning out.

Synthetic oil is also acceptable for your Craftsman mower engine.
You can also leave synthetic oil in your mower while it's being stored because there aren’t as many deposits and sediments as with conventional oil.

Oil Selection

Consider in which temperatures you will operate your Craftsman before you choose the oil based on viscosity. If you mow only during warmer temperatures above 46 degrees Fahrenheit, it’s acceptable to use SAE 30. If you operate in temperatures below 46 degrees F, use a low-weight oil such as 5W30. If you use your Craftsman year-round at temperatures between 6 and 122 degrees F, you can use a multiviscosity oil rated at 10W30.

The Craftsman brand of rotary lawn mowers is sold through Sears stores. These machines are equipped with gasoline-fueled internal combustion engines procured from manufacturers such as Briggs & Stratton. Different models of Craftsman-brand mowers have engines with different horsepower ratings and different lubrication specifications. Some Craftsman mower models feature four-cycle, single-cylinder gasoline engines rated at 6.5 horsepower that require 20 ounces of motor oil in the crankcase.

Oil Viscosity

The motor oil in your 6.5 horsepower Craftsman mower engine should have a viscosity rating of SAE 30 when the engine is run at temperatures above freezing (32 degrees Fahrenheit). Sears recommends use of SAE 5W-30 multi-viscosity motor oil for operation at temperatures below freezing. Oil should be a detergent formulation with an API service classification of SG to SL. Change the oil at the start of the mowing season and after each 25 hours of operation. Check the oil level at the beginning of each mowing session.

Craftsman lawnmowers use SAE 30 oil, which is the standard small engine oil. This is a type of all-purpose oil that can be used in push mowers and riding mowers.

Craftsman mowers can also use synthetic 5W-30 oil because it protects the engine for longer in all temperature conditions. Briggs and Stratton also recommends 10W-30 oil, but in temperatures higher than 80 degrees Fahrenheit, the engine begins to consume more oil. Synthetic 5W-30 oil is recommended for use in only winter weather conditions.

Using the wrong kind of oil in a lawnmower can damage the engine and lead to costly problems. Although car engines work by the same combustion principles, car oil should not be used in lawn mowers. Oils come in different viscosity levels, which is the thickness of the oil. SAE 30 is a thicker oil than a SAE 20 oil. Be sure to always check oil levels before using a Craftsman lawnmower.

What kind of oil does Craftsman push lawn mower use?

SAE 10W-30 4-Cycle Lawn Mower Oil (20 oz) | CRAFTSMAN.

Can I use 10W30 instead of SAE 30 in my lawn mower?

You can use 10w30 instead of SAE 30 in your lawn mower if you want. Since 10w30 has the same viscosity grade at operating temperature, you won't run into any problems by using it instead of SAE 30. Sometimes it is actually a good idea to make this switch. This would be the case for anybody mowing in colder climates.

What kind of oil do you put in a push mower lawn mower?

While automotive engine oil, such as 10W-30 or 10W-40, can be used in a lawn mower engine, it is generally recommended that SAE 30 motor oil be used.

Is SAE 30 the same as 10W30?

SAE 30 and 10W30 are two types of motor oil used in lawnmowers. SAE 30 is a thicker oil best used in warm weather, while 10W30 is a thinner oil better for use in cold weather. SAE 30 will provide better lubrication for your lawn mower's engine, but it may cause the engine to run hotter.