Which of the following statements about who can vote in primary elections is the most accurate?

What is Ranked Choice Voting? Ranked Choice Voting allows voters to rank candidates in order of preference. In the 2020 general election,

voters approved an initiative to establish a Ranked Choice Voting general election system.

How does Ranked Choice Voting work? In each race, voters will rank their choices in order of preference. Votes are counted in rounds.

This is what happens:

Round One: The Division counts all 1st choices. If a candidate gets 50% + 1 vote in round one, that candidate wins and the counting stops.

If not, counting goes to Round Two.

Round Two (and beyond): The candidate with the fewest votes gets eliminated. If you voted for that candidate, your vote goes to your next choice and you still have a say in who wins. If your first choice candidate was not eliminated, your vote stays with them. Votes are counted again.

This keeps happening in rounds until two candidates are left and the one with the most votes wins.

What happens if I only vote for one candidate?
Your vote is counted in round one and your vote stays with your candidate throughout tabulation.

Is there a benefit of ranking multiple choices? Yes. By ranking multiple candidates, you can still have a voice in who gets elected even if your top choice does not win. Ranking multiple candidates ensures your vote will go toward your second. third, fourth, or fifth coice

if your top choice is eliminated, giving you more voice in who wins.

How do I mark my ballot in a Ranked Choice Voting election?
Fill in only one oval per candidate, in each column. You do not have to rank all the candidates. Your second choice is only counted if your first choice candidate is eliminated.

Which of the following statements about who can vote in primary elections is the most accurate?
Instructions: Vote by ranking candidates of your choice.

  • Rank as many or as few candidates as you like
  • Completely fill in no more than one oval for each candidate or column
  • For your 1st choice, fill in the oval in the 1st choice column
  • For your 2nd choice, fill in the oval in the 2nd choice column, and so on
  • If you make a mistake, you can ask for a new ballot

Mistakes To Avoid

If you skip a ranking, your next ranking moves up. Here, if your first choice candidate is eliminated,
your third choice counts as your second choice and your fourth choice would count as your third choice.

Which of the following statements about who can vote in primary elections is the most accurate?

If you skip two or more rankings in a row, only the rankings before the skipped rankings will count.
Here, your first choice counts and the fourth choice would not count.

Which of the following statements about who can vote in primary elections is the most accurate?

If you give more than one candidate the same ranking, those rankings and later rankings will not count.
Here, only your first choice counts.

Which of the following statements about who can vote in primary elections is the most accurate?

Your vote only counts once, even if you rank a candidate more than once.
When a candidate is eliminated in a round, they are eliminated from all future rounds.

Which of the following statements about who can vote in primary elections is the most accurate?

Do I have to rank all candidates in the general election?
No. You may rank as many or as few candidates as you would like. If you do not want to rank a candidate, leave their row blank.

If I rank four candidates in a race, does that mean I got to vote four times? No. You only get one vote counted per race. Your vote will only count toward your highest ranked candidate in that race

who has not been eliminated. If your top choice candidate is eliminated, your vote will then count toward your next highest ranked candidate.

What about write-in candidates? To vote for a candidate whose name is not on the ballot, write the person’s name on the “Write-in” line, and fill in an oval to rank your choice. Write-in candidates will only advance if they come in first or a close second in the initial results. Ballot Measure No. 2 did not change the law for write-in candidates, so the Division issued a regulation at 6 AAC 25.071.

Write-ins will only be counted if the aggregate of all first choice votes cast for all write-ins for the particular office is:

1. The highest number of first choice votes received by any candidate for the office or

2. The second highest and the difference between the total number of first choice votes received by the leading candidate and

the first choice votes received by all the write-in candidates is less than .5 percent. (That percentage is calculated by dividing

the difference by the total number of first choice votes received by the leading candidate and the write-ins.)

If the write-ins do not meet the above requirements, all write-in candidates are defeated. If the write-ins do clear this threshold, by leading or coming in a close second in the first round, the Division will count the write-ins and treat them as individual

candidates in the ranked choice tabulation.


What happens if there is a tie during one of the tabulation rounds? Which candidate gets to advance? In the event of a tie between two candidates with the fewest votes in a round, Alaska law says the tie is resolved “by lot” to determine which candidate is eliminated and which candidate advances to the next round. Believe it or not, “by lot” means

the division’s director will flip a coin or draw straws. The same applies if there is a tie for the last two remaining candidates.

How will I know when and why my candidates were eliminated? Results reports showing how many votes each candidate had in every round and how votes were transferred when candidates were

eliminated will be available on the Division’s website, in addition to a summary report showing the final votes tallied for the winning candidate.

When and where will the tabulation rounds take place? Tabulation rounds will begin after the last counting of ballots on the 15th day following election day (November 23, 2022). This will happen in Juneau at the Director’s Office. Just like past elections, all results are unofficial until the State Review Board

certifies the election and all eligible absentee and questioned votes are counted.

What offices are elected using Ranked Choice Voting?
The bill includes President/Vice President, U.S. Senator, U.S. Representative, Governor/Lieutenant Governor, and all state representatives and state senators.

Will Ranked Choice Voting be used for judges and ballot measures?
No. All judicial retentions and ballot measures will continue to run in the same yes or no fashion as in past elections.

When is the first election the Ranked Choice Voting system will be used?
The August 16, 2022 Special General Election.

Will this information be available in other languages?
Yes. View translated Ranked Choice Voting pages here:

Skip to main content

Which of the following statements about who can vote in primary elections is the most accurate?

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Which of the following statements about who can vote in primary elections is the most accurate?

Secure .gov websites use HTTPS
A lock ( A locked padlock ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Which of the following statements about who can vote in primary elections is the most accurate?

Español

    expanded

    current page

    previous

    next

  • All Topics and Services
    • About the U.S.
      • American Flag
      • Branches of the U.S. Government
      • Budget of the U.S. Government
      • Data and Statistics About the U.S.
      • Government Agencies and Elected Officials
      • History and Historical Documents
      • Laws and Legal Issues
      • Learn About Life in the U.S.
      • Presidents, Vice Presidents, and First Ladies
    • Benefits, Grants, Loans
    • Consumer Issues
    • COVID-19
    • Disability Services
    • Disasters and Emergencies
    • Education
    • Government Agencies and Elected Officials
      • A-Z Index of U.S. Government Agencies
      • About the U.S.
      • Branches of the U.S. Government
      • Budget of the U.S. Government
      • Buying from the U.S. Government
        • Auctions and Sales
        • Surplus Sales by State
      • Contact Elected Officials
      • Forms, by Agency
      • State, Local, and Tribal Governments
    • Health
    • Housing
    • Jobs and Unemployment
    • Laws and Legal Issues
    • Military and Veterans
    • Money and Taxes
    • Small Business
    • Travel and Immigration
    • Voting and Elections
  • All Topics and Services

Learn about the presidential election process, including the Electoral College, caucuses and primaries, and the national conventions.

In other U.S. elections, candidates are elected directly by popular vote. But the president and vice president are not elected directly by citizens. Instead, they are chosen by “electors” through a process called the Electoral College.

The process of using electors comes from the Constitution. It was a compromise between a popular vote by citizens and a vote in Congress.     

The Electors

Each state gets as many electors as it has members of Congress (House and Senate). Including Washington, D.C.’s three electors, there are currently 538 electors in all.

Each state’s political parties choose their own slate of potential electors. Who is chosen to be an elector, how, and when varies by state.

How Does the Electoral College Process Work?

After you cast your ballot for president, your vote goes to a statewide tally. In 48 states and Washington, D.C., the winner gets all the electoral votes for that state. Maine and Nebraska assign their electors using a proportional system.

A candidate needs the vote of at least 270 electors—more than half of all electors in the U.S.—to win the presidential election.

In most cases, a projected winner is announced on election night in November after you vote. But the actual Electoral College vote takes place in mid-December when the electors meet in their states. See the Electoral College timeline of events for the 2020 election.

While the Constitution does not require electors to vote for the candidate chosen by their state's popular vote, some states do. The rare elector who votes for someone else may be fined, disqualified and replaced by a substitute elector, or potentially even prosecuted by their state.  

Special Situations

Winning the Popular Vote but Losing the Election

It is possible to win the Electoral College but lose the popular vote.  This happened in 2016, in 2000, and three times in the 1800s.

What Happens if No Candidate Wins the Majority of Electoral Votes?

If no candidate receives the majority of electoral votes, the vote goes to the House of Representatives. House members choose the new president from among the top three candidates. The Senate elects the vice president from the remaining top two candidates.

This has only happened once. In 1824, the House of Representatives elected John Quincy Adams as president.

How to Change the Electoral College

The Electoral College process is in the U.S. Constitution. It would take a constitutional amendment to change the process.

Explains the presidential election process from beginning to end.

  • Show the Video Transcript

    The Requirements

    Lots of people dream of becoming President of the United States. But to officially run for office, a person needs to meet three basic requirements established by the U.S. Constitution (Article 2, Section 1).

    A Presidential candidate must be:

    • A natural born citizen (U.S. citizen from birth)
    • At least 35 years old and
    • A U.S. resident (permanently lives in the U.S.) for at least 14 years

    Step 1: Primaries and Caucuses

    People with similar ideas usually belong to the same political party. The two main parties in the U.S. are Republican and Democrat.

    Many people want to be President. They campaign around the country and compete to try to win their party’s nomination.

    In caucuses, party members meet, discuss, and vote for who they think would be the best party candidate.

    In primaries, party members vote in a state election for the candidate they want to represent them in the general election.

    Step 2: National Conventions and General Election

    After the primaries and caucuses, each major party, Democrat and Republican, holds a national convention to select a Presidential nominee.

    The party’s Presidential nominee announces his or her choice for Vice President.

    The Presidential candidates campaign throughout the country to win the support of the general population.

    On election day, people in every state cast their vote .

    Step 3: The Electoral College

    When people cast their vote, they are actually voting for a group of people called electors.

    The number of electors each state gets is equal to its total number of Senators and Representatives in Congress. A total of 538 electors form the Electoral College.

    Each elector casts one vote following the general election. The candidate who gets 270 votes or more wins.

    The newly elected President and Vice President are then inaugurated on January 20th.

An election for president of the United States happens every four years on the first Tuesday after the first Monday in November. The most recent presidential election was November 3, 2020.

Primaries, Caucuses, and Political Conventions

The election process begins with primary elections and caucuses. These are two methods that states use to select a potential presidential nominee

Which of the following statements about who can vote in primary elections is the most accurate?
Nominee: the final candidate chosen by a party to represent them in an election.. In general, primaries use secret ballots for voting. Caucuses are local gatherings of voters who vote at the end of the meeting for a particular candidate. Then it moves to nominating conventions, during which political parties each select a nominee to unite behind. During a political party convention, each presidential nominee also announces a vice presidential running mate. The candidates then campaign across the country to explain their views and plans to voters. They may also participate in debates with candidates from other parties.

What is the Role of the Electoral College?

During the general election

Which of the following statements about who can vote in primary elections is the most accurate?
General Election: a final election for a political office with a limited list of candidates. , Americans go to their polling place
Which of the following statements about who can vote in primary elections is the most accurate?
Polling Place: the location in which you cast your vote.
to cast their vote for president. But the tally of those votes—the popular vote—does not determine the winner. Instead, presidential elections use the Electoral College. To win the election, a candidate must receive a majority of electoral votes. In the event no candidate receives a majority, the House of Representatives chooses the president and the Senate chooses the vice president.

What is a Typical Presidential Election Cycle?

The presidential election process follows a typical cycle:

  • Spring of the year before an election – Candidates announce their intentions to run.

  • Summer of the year before an election through spring of the election year – Primary and caucus

    Which of the following statements about who can vote in primary elections is the most accurate?
    Caucus: a statewide meeting held by members of a political party to choose a presidential candidate to support. debates take place.

  • January to June of election year – States and parties hold primaries

    Which of the following statements about who can vote in primary elections is the most accurate?
    Primary: an election held to determine which of a party's candidates will receive that party's nomination and be their sole candidate later in the general election. and caucuses.

  • July to early September – Parties hold nominating conventions to choose their candidates.

  • September and October – Candidates participate in presidential debates.

  • Early November – Election Day

  • December – Electors

    Which of the following statements about who can vote in primary elections is the most accurate?
    Elector: a person who is certified to represent their state's vote in the Electoral College. cast their votes in the Electoral College.

  • Early January of the next calendar year – Congress counts the electoral votes.

  • January 20 – Inauguration Day

Before the general election, most candidates for president go through a series of state primaries and caucuses. Though primaries and caucuses are run differently, they both serve the same purpose. They let the states choose the major political parties’ nominees for the general election.

How State Primaries and Caucuses Work

  • State primaries are run by state and local governments. Voting happens through secret ballot.

  • Caucuses are private meetings run by political parties. They are held at the county, district, or precinct level. In most, participants divide themselves into groups according to the candidate they support. Undecided voters form their own group. Each group gives speeches supporting its candidate and tries to get others to join its group. At the end, the number of voters in each group determines how many delegates each candidate has won.

  • Both primaries and caucuses can be “open,” “closed,” or some hybrid of the two.

    • During an open primary or caucus, people can vote for a candidate of any political party.

    • During a closed primary or caucus, only voters registered with that party can take part and vote.

    • “Semi-open” and “semi-closed” primaries and caucuses are variations of the two main types.

Learn which states have which types of primaries.

Awarding Delegates From the Primaries and Caucuses

At stake in each primary or caucus is a certain number of delegates. These are individuals who represent their state at national party conventions. The candidate who receives a majority of the party’s delegates wins the nomination. The parties have different numbers of delegates due to the rules involved in awarding them. Each party also has some unpledged delegates or superdelegates. These delegates are not bound to a specific candidate heading into the national convention.

When the primaries and caucuses are over, most political parties hold a national convention. This is when the winning candidates receive their nomination.

For information about your state's presidential primaries or caucuses, contact your state election office or the political party of your choice.

The president must:

  • Be a natural-born citizen of the United States

  • Be at least 35 years old

  • Have been a resident of the United States for 14 years

Anyone who meets these requirements can declare their candidacy for president. Once a candidate raises or spends more than $5,000 for their campaign, they must register with the Federal Election Commission. That includes naming a principal campaign committee to raise and spend campaign funds.

After the primaries and caucuses, most political parties hold national conventions.

What Happens at a National Political Convention?

To become the presidential nominee, a candidate typically has to win a majority of delegates. This usually happens through the party's state primaries and caucuses. State delegates go to the national convention to vote to confirm their choice of candidates.

But if no candidate gets the majority of a party's delegates during the primaries and caucuses, convention delegates choose the nominee. This happens through additional rounds of voting.

Types of Delegates at a National Convention

There are two main types of delegates.

  1. Pledged, or bound delegates must support the candidate they were awarded to through the primary or caucus process.
  2. Unpledged delegates or superdelegates can support any presidential candidate they choose.

Contested and Brokered Conventions

In rare cases, none of the party's candidates may have a majority of delegates going into the convention. The convention is then considered "contested." Delegates will pick their presidential nominee through one or more rounds of voting.

  • In the first round of voting, pledged delegates usually have to vote for the candidate they were awarded to at the start of the convention. Unpledged delegates can vote for any candidate.
  • Superdelegates cannot vote in the first round unless a candidate already has enough delegates through primaries and caucuses to get the nomination.
  • If no nominee wins in the first round, the convention is considered "brokered." The pledged delegates may choose any candidate in later rounds of voting. Superdelegates can vote in these later rounds.
  • Balloting continues until one candidate receives the required majority to win the nomination.

At the convention, the presidential nominee officially announces their selection of a vice presidential running mate.

Last Updated: September 13, 2022

Top