What is diameter and radius

What is Radius?

The distance from the center of a circle to any point on the circle itself is exactly the same. This distance is called the radius of the circle.

What is Diameter?

The diameter is the length of the line through the center that touches two points on the edge of the circle.

TOP DIFFERENCES BETWEEN RADIUS AND DIAMETER:

RADIUS	DIAMETER
The radius is the length from the midpoint of the circle to the outer edge of the circle.	Diameter is the full length of the circle running from the edge, through the midpoint, all the way to the other side.
The radius is represented by the lowercase letter “r.”	The diameter of a circle is represented by the letter “d.”
The radius of a circle runs from its center to its edge.	diameter runs from edge to edge and cuts through the center.
radius (r=d2)!	diameter (d=2r)

Conclusion:

The Radius is the distance from the center outwards. The Diameter goes straight across the circle, through the center. The Circumference is the distance once around the circle. Both Radius and Diameter are related to a circle only.

Also, Read Differences between Symmetrical and Asymmetrical.

In a circle, diameter is a line that passes through the center and meets the circumference at opposite ends. It is twice as long as that of the radius of the circle. In other words, the diameter of a circle is the line that passes through the center and divides the circle into two equal parts. Let us learn more about diameter definition and properties in this article.

What is the Diameter of a Circle?

The diameter of a circle is any straight line segment that passes through the center of the circle and whose endpoints lie on the circumference of the circle. The diameter is also known as the longest chord of the circle.

Diameter Definition

The diameter is defined as twice the length of the radius of a circle. The radius is measured from the center of a circle to one endpoint on the boundary of the circle, whereas, the distance of diameter is measured from one end of the circle to a point on the other end of the circle, passing through the center. It is denoted by the letter D. There are infinite points on the circumference of a circle, this means that a circle has an infinite number of diameters, and each diameter of the circle is of equal length.

Diameter Symbol

Ø is the symbol that is used in engineering to represent diameter. This symbol is commonly used in technical specifications and drawings. A Ø25 mm means the diameter of the circle is 25 mm.

Diameter of Circle Formula

We all know that diameter is a part of a circle. Let us understand a few terms before we learn the formula for the diameter of a circle.

The radius (r) is the length of the line segment from the center of the circle to an endpoint on the circle.
Circumference (C) refers to the enclosed boundary of the circle. It is also known as the perimeter of the circle.
The area of a circle is the total space present inside the boundary of a circle. It is calculated using the formula πr2, where r is the radius.

We can derive the diameter formula from the circumference, area, and radius of the circle.

Diameter of a Circle Using Circumference

We can easily derive the diameter formula from the circumference. The formula for the circumference of a circle is C = πd; here, C = Circumference, d = Diameter of a circle, π = 22/7 or 3.142 approx. The diameter formula using circumference is,

Diameter = Circumference ÷ π.

Diameter of a Circle Using Radius

Radius is the length of the line segment from the center of the circle to an endpoint on the circle and diameter is twice the length of the radius of the circle. Using this definition, the formula for the diameter is D = Radius × 2.

Diameter Formula Using Area of Circle

We can derive the diameter of a circle formula using the area of the circle formula that is, area (A) = π(Radius)2. By substituting the value of radius as D/2, we get, A/π = (D/2)2.

⇒ D/2 = √(A/π)

⇒ D = 2 × √(A/π)

Hence, the diameter of the circle formula using area, D = 2√Area/π.

How to Find the Diameter of a Circle?

The diameter of a circle can be calculated if the radius, circumference, or area is given. Follow the steps given below to find the diameter of a circle:

Step 1: The first step is to identify what is given in the question: radius, area, or circumference.
Step 2: Apply the appropriate formula from the above three formulae.
Step 3: Simplify and get the answer.

Let us try using the formulas mentioned above in a practical illustration to find the diameter. Observe the example given below.

Example: Jack drew a circle of radius 3 units. What is the diameter of the circle?

Solution:

Given: Radius of the circle = 3 units. The diameter of the circle is = 2 × Radius = 2 × 3 = 6 units

Therefore, the diameter of the circle is 6 units.

Diameter vs Radius

As we have already discussed the length of the diameter is twice of radius. There are some similarities and differences between diameter and radius that we are going to learn in this section. Before moving on to the difference between diameter and radius, let us first talk about their similarities. Both diameter and radius are parts of a circle that define various properties like the size of the circle, circumference, and area of a circle. They share a relationship in the form of an equation. i.w. Diameter = 2 × Radius.

Look at the table given below to understand diameter vs radius.

Diameter	Radius
The diameter of a circle is twice its radius.	It is half of the length of the diameter.
For any circle, length of diameter > length of the radius.	The length of the radius is smaller than the diameter.
It starts from the boundary of the circle and ends at the boundary itself.	It starts from the center and touches the circle's circumference at a point.

☛ Related Topics

Check these interesting articles related to the diameter of a circle.

Example 1: The radius of a circle is 15 units. Calculate its diameter.

Solution: Given, radius = 15 units We know that, Diameter = 2 × radius = 2 × 15
Therefore, diameter = 30 units.

Example 2: Can you determine the value of the radius if the diameter of a circle is 36 units?

Solution: Given : Diameter = 36 units We know that diameter is twice the value of the radius. This means the radius is half of the value of the diameter. Diameter = 2 × Radius R = D ÷ 2 Radius = 36 ÷ 2 = 18 units

Therefore, radius = 18 units.

Example 3: The diameter of a circular swimming pool is 7 feet. What is the circumference of the swimming pool? Express your answer in terms of π.

Solution: Given: Diameter = 7 feet We know that circumference of a circle = π × d Thus, Circumference of the swimming pool = π × 7

Therefore, the circumference of the pool = 7π feet.

go to slidego to slidego to slide

Ready to see the world through math’s eyes?

Math is a life skill. Help your child perfect it through real-world application with Cuemath.

Book a Free Trial Class

FAQs on Diameter

A diameter is a straight line that passes through the center of a circle and divides the circle into two sections/semicircles. It is the longest chord of the circle that meets the circumference at opposite ends.

Which Symbol is Used to Represent Diameter?

The symbol used to represent the diameter in engineering is ⌀. It is often referred to as "phi". This phi symbol is used to describe the diameter of a circular section. For example, "⌀20" means the diameter of a circle is 20 units in dimensions.

What are Radius and Diameter?

The radius and diameter of a circle are two important parts of a circle that are interdependent on each other. The radius of a circle is a line segment that starts from the center of a circle and ends at the circumference of the circle. It is half the length of the diameter of a circle, i.e., Radius = Diameter/2. The diameter of a circle is a line segment that passes through the center of a circle and has two endpoints at the circumference. It is twice the length of the radius of a circle, i.e., Diameter = 2 × Radius.

How to Calculate Diameter?

The diameter of a circle can be calculated according to the given parameters. If the parameters like radius, circumference, or area are given then we can directly use the following formulas.

Diameter = Circumference ÷ π (when the circumference is given)
Diameter = 2 × Radius (when the radius is given)
Diameter = 2√[Area/π] (when the area is given)

What is an Example of a Diameter?

If you observe the wheel of a cycle, the spikes running from one end to another end through the center are an example of diameter. We can relate this to the diameter of a circle, as the diameter is the line segment that starts from one end of a circle and ends at the other end of the circle passing through the center.

How to Find the Diameter from Circumference?

If the circumference of a circle is known then we can easily find the value of the diameter by substituting the values in the formula: Diameter = C ÷ π; where 'C' is the circumference and the value of π is 22/7 or 3.14 approximately.

How to Find the Area of a Circle With the Diameter?

The area of a circle is calculated with the help of the formula: πr2. If the diameter is given we can find the radius by dividing the value of diameter by 2. After getting the radius, we can substitute its value in the formula: πr2 to get the area of the circle or directly apply the area formula with diameter, A = π(d/2)2 = πd2/4 square units.

What is the Use of Diameter to Circumference Calculator?

The diameter to circumference calculator is an online tool used to determine the value of the circumference of a circle. In the diameter to circumference calculator enter the dimension of the diameter and get the value of circumference within a few seconds. You can also try the diameter calculator for direct calculations.

What is the Diameter of a Circle Formula When Radius of a Circle is Known?

If the radius of a circle is given in 'r' units then it is easy to determine the diameter of the circle formula. With the definition of radius, we know that it is half of the diameter hence, the diameter formula = 2r.

What is Half of a Diameter of a Circle Called?

The diameter of a circle is a line segment from one end of the circle to the other end of the circle passing through the center of the circle. Whereas, the radius of a circle is the length of the line segment from the center of a circle to a point on the circumference of the circle. Hence, the radius is half of the diameter of a circle.

The radius of a circle is half the diameter. The relation between radius and diameter can be mathematically expressed in the formula: Diameter = 2 × radius.