The Whirlpool refrigerator air filter is a device that is placed inside the fridge near the back panel. It helps keep the fridge air clean and free from odors. The filter is made of activated carbon and charcoal that has been treated to remove impurities. The air filter works by trapping the airborne particles released into the air every time the fridge is opened. These particles can include dust, mold spores, and bacteria. The filter helps keep the fridge air clean and free from these contaminants. To use the Whirlpool refrigerator air filter, locate it in the back of the refrigerator near the bottom. The filter should be easy to spot because it is usually a dark color. Once you have located the filter, open the door and pull out the drawer that houses the filter. If you have a Whirlpool refrigerator, you may want to know how to use and install the Whirlpool refrigerator air filter. Follow the instructions below to learn how to use and install the Whirlpool refrigerator air filter by buying it in the Best refrigerator sales and deals in June 2022. Installing the Whirlpool Refrigerator Air Filter
Cleaning
the Filter
Instructions
You should clean the Whirlpool refrigerator air filter every six months or as needed. Following these simple instructions, you can keep your air filter working properly and enjoy fresh, clean air in your fridge. Conclusion FacebookTwitterLinkedin When you own a refrigerator that makes ice and puts out cold water, you will need to change the filter every six months to keep your water tasting fresh. Today we are going to explain how to change the water filter on a Whirlpool WRS325SDHZ refrigerator. The filter you will need to have is an EveryDrop 10383251.
Finding where your refrigerator should be very easy – most refrigerators have a water line that runs through the cabinets to below the sink. Once you locate the source, there should be a valve. Turn the valve clockwise until it won’t turn anymore. 2. Drain the Water from the Refrigerator Using a pitcher or large glass, drain the water from the cup filler on the front of the refrigerator. Make sure you drain all the water from your refrigerator so you won’t have any leaking when you remove the filter. 3. Remove Water Filter The water filter will be located inside the refrigerator, at the top left of the refrigerator part. Flip down the cover; you will see an arrow on the cap pointing to the right. Turn it counter-clockwise until the arrow is pointing up. The filter should slide right out. After the filter is removed, make sure you take the cap off of the old filter and then dispose of the used filter properly. 4. Install New Filter Click cap onto the new filter. Insert new filter with the arrow pointing up; then turn the filter clockwise until you hear a click. The arrow should be pointing to the right. 5. Finish Once you have the new filter installed, turn the water back on. Then you will need to “bleed” the line. Run the water for five minutes to ensure there is no air left in the line. Once that is done, you should be all set! If the filter light hasn’t reset, just press and hold the filter button on the front of the freezer door. And if you need help with anything, repairs, troubleshooting, etc., contact us! We at Jerry’s Appliance Repair have professional repair techs who are ready to come help you with anything you need. Where is the refrigerator filter located?The majority of refrigerator filters are located in one of two locations: in the grille at the base of the fridge or in the back upper-right corner of the interior. In either location, you'll see a knob or a button that will release the filter for removal.
Do Whirlpool refrigerators have filters?Replacing your filter is quick and easy. First, look for the number printed on your filter or find the water filter recommended for your Whirlpool® refrigerator based on its model number. Next, locate the placement of your filter inside your refrigerator.
|