iPhones usually work pretty well. There’s usually no slowing down, and updates come on time and work well. However, every now and then, you may face some issues with your iPhone and one of the most common problems that I have seen people facing is the iPhone stuck on a boot-loop. So, if you’re wondering “why does my iPhone keep showing the Apple logo and turning off”, well, we have all the solutions for you. Here’s how to fix the iPhone stuck on Apple logo problem. Show
Before we take a look at the solutions, let’s try and understand the problem. Why is it that your iPhone is displaying the Apple logo and then turning off on its own? There are a couple of reasons that you might be facing a problem like this. If you have jailbroken your iPhone, it could result in errors such as this one. Moreover, something may have gone wrong while updating your iPhone, or, in the worst case, it could be a hardware fault. How to Fix iPhone Keeps Showing Apple Logo and Turning OffThere are a lot of solutions that you can try to fix this problem. We are going to take a look at all of them, from the easiest and most safe solution, to other alternatives that you can try if you want to. 1. The Fastest and Easiest Way to Solve iPhone Keeps Showing Apple Logo On and OffThe first solution we’re sharing with you is also the safest and most efficient method to fix this problem. We will use Tenorshare ReiBoot for iOS in this method. You can download the software from this link. If you’re facing iPhone X keeps showing the Apple logo and turning off, this is the best and safest way to solve the issue. Here’s how to use Tenorshare ReiBoot to fix iPhone shows Apple logo and turns off
The process will start now. Make sure you keep your iPhone connected to your PC or Mac throughout the process. Once complete, your iPhone will boot up normally. The best part about using Tenorshare ReiBoot is that it causes no data loss at all. 2. The Official Method to Fix My iPhone Keeps Showing the Apple Logo and Turning OffIf you have tried to restore your iPhone recently, or updated it and are facing the iPhone stuck on Apple logo and turning off problem, you can try the official method suggested by Apple as well. Here is how to fix my iPhone 8 keeps showing the Apple logo and turning off with iTunes.
3. Other Ways That May Work to Solve iPhone Keeps Showing Apple Logo Then Turning OffHard Reset Your iPhoneIf your iPhone is stuck on the Apple logo, sometimes a hard reset can fix the problem. Here is how to hard reset your iPhone. iPhone 8, iPhone SE 2020, iPhone X and later
iPhone 7 and 7 Plus
iPhone 6s or earlier
Charge Your iPhoneSometimes you could be stuck on the Apple logo because your iPhone doesn’t have enough battery to fully boot up. If you suspect that might be the case, simply charge your iPhone for a while. Then, try restarting your iPhone and see if the problem has gone away. If it hasn’t you can check out some of the other methods mentioned in this article. DFU RestoreYou can also try performing a DFU restore on your iPhone that keeps showing the Apple logo and then turning off. This solution can sometimes fix issues with firmware that may be causing the problem.
4. Hardware Problem? Contact Apple SupportIf nothing is working, chances are there’s a hardware problem with your iPhone that’s causing it to be stuck on Apple logo and then turning off. In such a situation, you should contact Apple support to get your iPhone fixed. You can contact Apple support from this link. Solve iPhone Keeps Showing Apple Logo Then Turning Off with These MethodsIt’s never a fun sight when your iPhone keeps showing Apple logo then turning off. However, as you have seen in this article, there are a lot of solutions that you can try to fix this problem. Obviously, the best method to use is simply Tenorshare ReiBoot (download) which will fix your iPhone without any data loss. However, there are other solutions as well that you can also try. So, were you able to fix your iPhone’s boot loop issue? Let us know in the comments. Why does my iPhone keep turning on and off after being in water?The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
What do I do if my iPhone keeps restarting after water damage?Resetting the iPhone
All you need to do is try hard resetting the iPhone. If it is iPhone 6S or older, for 30 seconds of time, press and then hold down the Sleep / Wake button and Home button at the same time. For iPhone 7 and after that version, press and hold the power and volume down button.
Can iPhone be fixed after water damage?If your iPhone or iPad was fully submerged in water for any length of time, there is no guaranteed fix for water damage. There are a few things you can try, but don't get your hopes up. If your device has just been splashed, then chances are water hasn't gotten inside, but play it safe and follow these steps anyway.
|