My computer won t connect to wifi but other devices can windows 10

Download PC Repair Tool to quickly find & fix Windows errors automatically

If your Windows PC can’t or won’t connect to the Internet but other devices can, then this post may be able to help you. It will also help you if you receive No Internet connection or access after upgrading to Windows 11/10 message or maybe even after a Windows Update?  There have been cases where users upgraded to Windows 11/10, and then they got no option to connect to the Internet. The connectivity issues are reported mostly on wireless connections. Read this post if you face Internet connectivity or access problems on Windows 11 or Windows 10.

Microsoft attributes the problem to VPN connections present on the computer that was upgraded to Windows 10. In other words, if the computer had an active VPN software during the upgrade, the computer may fail to find Wi-Fi, as the VPN software might cause problems. But that is not the only case. Certain hardware is not compatible with Windows 11/10, and it might be the cause of the problem where you cannot connect to the Internet after upgrading to Windows 11/10. The post talks about possible solutions to the problem of No Internet connectivity.

First, make sure Wi-Fi is set to On. Open Settings > Network & Internet > Wi-Fi and move the slider to the On position. Also, make sure that the physical Wi-Fi button on your laptop is turned on.

Also, do the following. Right-click on the Start button to open the WinX Menu. Select Device Manager. Click on the Action tab and select Scan for hardware changes.

This will refresh the list.

TIP: This post will show you how to reset Internet Options to default in Windows 11.

Wi-Fi is not visible in list of networks after upgrading to Windows 11/10

Were you using VPN software while upgrading to Windows 10? If no, the problem could be with the router. Check to see if the router is broadcasting the SSID. To know this:

1. Type 192.168.1.1 in the browser address bar; the address is to connect to your router
2. Under the Wireless section of the configuration settings, see if there is an SSID and if the box against “Broadcast SSID” is checked; the wordings “broadcast SSID” may be different on the different routers so check for alternative labels if you can’t find “broadcast SSID” in Wireless section of the router configuration page

You may also change the SSID to something else and click on Save to make sure the SSID is visible in the list of networks being displayed when you click the network icon in the Windows 10 System Tray

If you were indeed using a VPN software while upgrading to Windows 10, you would have to remove the VPN virtual card using Windows Registry Editor.

Here is how to remove it using Windows Command Prompt:

Press Windows Key + R to bring up the Run dialog

Type CMD in the Run dialog and press Enter

In the command prompt window, type or copy-paste the following command and press Enter:

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

Again type or copy-paste the following and press Enter:

netcfg -v -u dni_dne

Reboot the computer and see if the WiFi is listed in the list of networks that appear when you click on the Network Icon in Windows System Tray.

Read: No WiFi after upgrading to Windows 11/10.

Power Cycle the Router

Sometimes, a simple power cycle can fix the issue. Remove the power plug from the router after turning it off. Leave it for a few seconds, plug in the power cord, and turn it on. Check to see if the WiFi is now visible in the list of networks.

Read: Ethernet connection not working in Windows.

Internet connection Password Not accepted

Sometimes you find the WiFi but are not able to connect because Windows 10 will not accept the password you enter. To make sure you are entering the correct password, follow these steps:

• Right-click on WiFi or network icon
• Select Open Network and Sharing Center
• Click on Change on Adapter Settings
• In the Network Properties window that appears, right-click on the WiFi connection and click on Status
• In the dialog box, that appears, click on Wireless Properties
• Click on Security Tab in the Wireless Properties window
• Just below the Wireless Security Key label, you will find “Show characters” checkbox; click on it to see the wireless password
• Note down the password and use it to connect to the WiFi

If it still creates a problem, it is better to change the password in the Router Configuration Page.

1. Type 192.168.1.1 in the browser’s address bar
2. Under the Wireless option, locate the SSID option;
3. There would be an option saying password or passphrase or something similar; change the password
4. Click on Save
5. Close the browser

Reboot and see if you can connect to the WiFi Internet connection.

Read: Site is not loading and you receive a This site can’t be reached error.

Use Windows Network Troubleshooter

You can also use the built-in Windows Network Troubleshooter to see what is causing the problem and to fix it automatically. To start Windows Network Troubleshooter, type Network Troubleshooter in the search box next to Start Button. Click on Identify and Repair Network Connections from the list that appears. That will start Windows Network Troubleshooter. The wizard will lead you through steps to troubleshoot the connection problem.

Read:

• Can’t connect to this network WiFi error in Windows 11/10
• WiFi connected, but no internet access.

The above explains fix when you cannot connect to the Internet after upgrading to Windows 10 in brief. You might also want to see if the router is supported by connecting using an Ethernet cable. If not, contact your router manufacturer.

Additional related posts:

• Network & Internet connection problems
• Windows can’t get the Network Settings from the router
• No internet, Secured error in Windows 11/10
• Dial-up Error 633 The modem is already in use or is not configured
• Limited Network Connectivity message.