How to reset oil light jeep cherokee

Like every other vehicle, the Jeep Cherokee requires regular oil changes at specified intervals. The oil life indicator will notify you when it is time to change your oil.

Depending on your driving habits, the interval may be different. You can reset the oil life indicator yourself in just a few simple steps.

To reset the oil life indicator on your Jeep Cherokee, turn the ignition to the On position, depress and release the accelerator pedal three times within five seconds and turn the ignition off. Now you can start the engine and verify that the indicator has been reset.

What Is the Oil Life Monitor on a Jeep Cherokee?

Determining the best time to change your oil can be a tricky business. Too soon and you’re wasting money, but too late and you could cause serious damage to your engine. That’s where the Oil Life Monitor comes in.

The Oil Life Monitor is a system in the Jeep Cherokee that uses sensors to determine when your oil needs to be changed.

It takes into account various factors such as engine temperature, engine speed, and miles driven. By monitoring these factors, the system can give you a more accurate estimate of when your oil needs to be changed.

How It Works

The oil life monitor is composed of a few different parts. There is the sensor, which monitors the various factors mentioned above.

There is also the control module, which processes the information from the sensor and determines when it is time to change your oil. Also, there is the display, which shows you when the system has determined that it is time for an oil change.

How to reset oil light jeep cherokee

When to Reset the Oil Life Monitor

There are a few different situations in which you might need to reset the oil life monitor. One is if you change your oil and want the system to start monitoring from that point. Another is if you go on a long trip and drive more miles than usual.

You may also need to reset the system if you use a different type of oil than what was originally specified for your Jeep Cherokee.

Resetting the Oil Life Monitor

Resetting the oil life monitor is a fairly simple process. Here is a step-by-step guide:

  1. Turn the ignition to the On position without starting the engine.
  2. depress and release the accelerator pedal three times within five seconds.
  3. Turn the ignition off and then start the engine to verify that the indicator has been reset.

This is a fairly easy process, but it is important to follow the steps carefully. If the light does not go off, then you can repeat the process.

Why Is It Important to Reset the Oil Life Monitor?

It is important to reset the oil life monitor for a few different reasons. It ensures that your Jeep Cherokee is using the most accurate information to determine when your oil needs to be changed.

Then, it allows you to keep track of your oil changes and make sure that you are changing your oil at the proper interval. It gives you a chance to reset the system if you make any changes that might affect the oil life, such as using a different type of oil.

Benefits of an Oil Life Monitor on a Jeep Cherokee

How to reset oil light jeep cherokee

The are several benefits to having an oil life monitor on your Jeep Cherokee. Here are some:

Saves on Cost

The oil life monitor can save you money by helping you to change your oil only when it is necessary. This can help to extend the life of your engine and avoid costly repairs.

Improves Efficiency

By changing your oil only when it is needed, you can also improve the efficiency of your Jeep Cherokee. This is because old, dirty oil can cause your engine to work harder, which can use more fuel.

Reduces Environmental Impact

Another benefit of the oil life monitor is that it can help to reduce your environmental impact. This is because changing your oil less often will mean that there is less waste oil to dispose of.

Common Problems With the Jeep Cherokee Oil Life Monitor

There are a few common problems that can occur with the oil life monitor on your Jeep Cherokee. One is that the system may not reset properly. If this happens, you can try repeating the steps above.

Another problem that can occur is that the light may come on too often. This could be due to a faulty sensor or a problem with the control module. If this happens, you should take your Jeep Cherokee to a mechanic to have it checked out.

Some other common problems include the light coming on and then going off again, or the light staying on all the time. These could also be caused by a faulty sensor or a problem with the control module.

If you are having any of these problems, it is best to take your Jeep Cherokee to a mechanic to have it checked out.

Frequently Asked Questions

How to reset oil light jeep cherokee

Does Oil Life Automatically Reset?

The oil life monitor will automatically reset itself after an oil change. However, if you use a different type of oil than what was originally specified for your Jeep Cherokee, you will need to manually reset the system.

How Long Does Oil Last in a Jeep Cherokee?

The length of time that oil will last in a Jeep Cherokee depends on several factors, such as the type of oil used, the driving conditions, and the maintenance schedule. However, most experts agree that oil should be changed every 5000 miles or so.

Can I Install a New Oil Life Monitor in My Jeep Cherokee?

Yes, you can install a new oil life monitor in your Jeep Cherokee. However, it is best to have a mechanic do it for you to ensure that it is installed properly.

What Happens If I Don’t Reset the Oil Life Monitor?

If you don’t reset the oil life monitor, it could lead to inaccurate readings and poor performance from your Jeep Cherokee. It is best to reset the system after each oil change to ensure that it is working properly.

Does 0% Oil Life Mean No Oil?

No, 0% oil life does not mean that there is no oil in your Jeep Cherokee. It simply means that it is time to change the oil. However, you should check your oil level regularly to make sure that it is full.

How Accurate Is the Oil Life Monitor?

The oil life monitor is generally accurate. However, there are a few factors that can affect its accuracy, such as the type of oil used, the driving conditions, and the maintenance schedule.

How to reset oil light jeep cherokee

How Far Can You Drive on 5% Oil Life?

In a Jeep Cherokee, you can usually drive for about 500 miles on 5% oil life. However, it is best to change the oil as soon as possible to avoid any damage to your engine.

Conclusion

Flip the ignition to the On position without starting the vehicle to reset the oil life indicator on your Jeep Cherokee. Accelerate three times in five seconds by pressing and releasing the gas pedal. Start the engine after turning off the ignition to make sure the indication has been reset.

The oil life monitor is a vital part of keeping your Jeep Cherokee running smoothly. Monitoring various factors can give you a more accurate estimate of when your oil needs to be changed.

To guarantee the best engine performance from your Jeep Cherokee, it’s critical to change your oil at the recommended intervals.

For more related Jeep Cherokee topics, here are our other posts:

How To Turn On Blind Spot Monitoring On The Jeep Cherokee

Jeep Cherokee Won’t Start But Has Power

P0132 Jeep Cherokee Error Code → Meaning & Fix

How do you reset the oil life on a 2016 Jeep Cherokee?

Oil Change Reset.
Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine)..
Fully depress the accelerator pedal, slowly, three times within 10 seconds..

How do you reset the oil life on a 2015 Jeep Cherokee?

To reset the 2015 Jeep Cherokee oil light, please follow these instructions:.
Turn the ignition to run (one position before starting engine)..
Fully depress the accelerator pedal slowly three times within 10 seconds..
Turn the ignition off and then start the engine to verify the indicator has been reset..