Finding the Slope of a Line Learning Objective(s) · Find the slope of a line from a graph. · Find the slope of a line given two points. · Find the slope of the lines x = a and y = b. Introduction The idea of slope is something you encounter often in everyday life. Think about rolling a cart down a ramp or climbing a set of stairs. Both the ramp and the stairs have a slope. You can describe the slope, or steepness, of the ramp and stairs by considering horizontal and vertical movement along them. In conversation, you use words like “gradual” or “steep” to describe slope. Along a gradual slope, most of the movement is horizontal. Along a steep slope, the vertical movement is greater. The mathematical definition of slope is very similar to our everyday one. In math, slope is used to describe the steepness and direction of lines. By just looking at the graph of a line, you can learn some things about its slope, especially relative to other lines graphed on the same coordinate plane. Consider the graphs of the three lines shown below:
First, let’s look at lines A and B. If you imagined these lines to be hills, you would say that line B is steeper than line A. Line B has a greater slope than line A. Next, notice that lines A and B slant up as you move from left to right. We say these two lines have a positive slope. Line C slants down from left to right. Line C has a negative slope. Using two of the points on the line, you can find the slope of the line by finding the rise and the run. The vertical change between two points is called the
rise, and the horizontal change is called the run. The slope equals the rise divided by the run:
Finding the Slope of a Line from a Graph You can determine the slope of a line from its graph by looking at the rise and run. One characteristic of a line is that its slope is constant all the way along it. So, you can choose any 2 points along the graph of the line to figure out the slope. Let’s look at an example.
This line will have a slope of Let’s look at another example.
When you look at the two lines, you can see that the blue line is steeper than the red line. It makes sense the value of the slope of the blue line, 4, is greater than the value of the slope of the red line, The next example shows a line with a negative slope.
Direction is important when it comes to determining slope. It’s important to pay attention to whether you are moving up, down, left, or right; that is, if you are moving in a positive or negative direction. If you go up to get to your second point, the rise is positive. If you go down to get to your second point, the rise is negative. If you go right to get to your second point, the run is positive. If you go left to get to your second point, the run
is negative. In the example above, you could have found the slope by starting at point B, running −2, and then rising +3 to arrive at point A. The result is still a slope of
Looking at Equations The slope of a line can sometimes be quickly determined from its equation. Let’s consider the line whose equation is y = 5x. You can create a table of values to find 3 points on the line. Plotting these points, create the graph of the line and determine the slope.
As you move from the point (-1, -5) to the point (2, 10), the line has a rise of 15 and a run of 3, so the slope of the line is Whenever the equation of a line is written in the form y = mx + b, it is called the slope-intercept form of the equation. The m is the slope of the line. And b is the b in the point that is the y-intercept (0, b). For example, for the equation y = 3x – 7, the slope is 3, and the y-intercept is (0, −7). What if the equation is written as 2y = 5x + 1? Then you must rewrite the equation in the form y = mx + b. Solve for y. 2y = 5x + 1 y = The slope is What is the slope of the line whose equation is y = −2x + 7? A) 7 B) 2 C) −2 D) Finding the Slope of a Line Given Two Points You’ve seen that you can find the slope of a line on a graph by measuring the rise and the run. You can also find the slope of a straight line without its graph if you know the coordinates of any two points on that line. Every point has a set of coordinates: an x-value and a y-value, written as an ordered pair (x, y). The x value tells you where a point is horizontally. The y value tells you where the point is vertically. Consider two points on a line—Point 1 and Point 2. Point 1 has coordinates (x1, y1) and Point 2 has coordinates (x2, y2).
The rise is the vertical distance between the two points, which is the difference between their y-coordinates. That makes the rise y2− y1. The run between these two points is the difference in the x-coordinates, or x2− x1. So, In the example below, you’ll see that the line has two points each indicated as an ordered pair. The point (0, 2) is indicated as Point 1, and (−2, 6) as Point 2. So you are going to move from Point 1 to Point 2. A triangle is drawn in above the line to help illustrate the rise and run.
You can see from the graph that
the rise going from Point 1 to Point 2 is 4, because you are moving 4 units in a positive direction (up). The run is −2, because you are then moving in a negative direction (left) 2 units. Using the slope formula, You do not need the graph to find the slope. You can just use the coordinates, keeping careful track of which is Point 1 and which is Point 2. Let’s organize the information about the two points:
The slope,  It doesn’t matter which point is designated as Point 1 and
which is Point 2. You could have called (−2, 6) Point 1, and (0, 2) Point 2. In that case, putting the coordinates into the slope formula produces the equation
The example below shows the solution when you reverse the order of the points, calling (5, 5) Point 1 and (4, 2) Point 2.
Notice that regardless of which ordered pair is named Point 1 and which is named Point 2, the slope is still 3.
What is the slope of a line that includes the points (−5, 1) and (−2, 3) A) B) C)
D) Advanced Question What is the slope of a line that includes the points
A)
B) C)
D) Finding the Slopes of Horizontal and Vertical Lines So far you’ve considered lines that run “uphill” or “downhill.” Their slopes may be steep or gradual, but they are always positive or negative numbers. But there are two other kinds of lines, horizontal and vertical. What is the slope of a flat line or level ground? Of a wall or a vertical line? Let’s consider a horizontal line on a graph. No matter which two points you choose on the line, they will always have the same y-coordinate. The equation for this line is y = 3. The equation can also be written as y = (0)x + 3.
Using the form y = 0x + 3, you can see that the slope is 0. You can also use the slope formula with two points on this horizontal line to calculate the slope of this horizontal line. Using (−3, 3) as Point 1 and (2, 3) as Point 2, you get: The slope of this horizontal line is 0. Let’s consider any horizontal line. No matter which two points you choose on the line, they will always have the same y-coordinate. So, when you apply the slope formula, the numerator will always be 0. Zero divided by any non-zero number is 0, so the slope of any horizontal line is always 0. The equation for the horizontal line y = 3 is telling you that no matter which two points you choose on this line, the y-coordinate will always be 3. How about vertical lines? In their case, no matter which two points you choose, they will always have the same x-coordinate. The equation for this line is x = 2.
There is no way that this equation can be put in the slope-point form, as the coefficient of y is 0 (x = 0y + 2). So, what happens when you use the slope formula with two points on this vertical line to calculate the slope? Using (2, 1) as Point 1 and (2, 3) as Point 2, you get: But division by zero has no meaning for the set of real numbers. Because of this fact, it is said that the slope of this vertical line is undefined. This is true for all vertical lines— they all have a slope that is undefined.
Advanced Question Which of the following points will lie on the line created by the points A)
B) C)
D) Summary Slope describes the steepness of a line. The slope of any line remains constant along the
line. The slope can also tell you information about the direction of the line on the coordinate plane. Slope can be calculated either by looking at the graph of a line or by using the coordinates of any two points on a line. There are two common formulas for slope: Slope = The images below summarize the slopes of different types of lines.
|
How do u find a slope of a line
Copyright © 2024 themosti Inc.
