Show K0904V1 2/06 Rev. B ADEMCO 6160RF Keypad/Transceiver User Guide KEYPAD DISPLAYS AND LEDS The 6160RF has the following features: • Large backlit, 2-line, 32-character alphanumeric LCD. • 16 large telephone-style backlit keys located behind a decorative door that swings down to provide access to the keys. • System numerals, imprinted in large type on the keys for easy identification. System functions appear below the keys on the keypad. The following table shows the LEDs and their functions: LED Function ARMED (Red) Lights when the system is armed in any mode. READY (Green) Lights when the system is ready to be armed (no zone faults are present). FUNCTION KEYS AND LABELS The function keys are continuously backlit for ease in use. (Check the User Guide that accompanies the control panel for detailed instructions on the use of these keys.) Function Keys - The function keys include keys for panic alarm activation. The panic alarms are activated by pressing key pairs [1] & [*], [3] & [#], or [*] & [#], or a Special Function Key. Whether these panic keys function and the type of panic alarms they produce is determined by the control panel’s capability and programming. (Check with your installer for the availability and type of alarm of these panic keys.) Special Function Keys - These are the four keys located to the left of the numeric keys (see below ). The keys may be programmed by your installer for panic alarms or other special functions such as single-button arming (Check with your installer to see which options are available with your system.) Special function keys and function key pairs must be held down for at least 2 seconds to activate an alarm. A set of adhesive labels with typical panic symbols is provided. Place the appropriate label in the indented area on each key, so that the user can easily identify each key’s function. SOUNDER The built-in speaker has the following functions: • Produces warning sounds during alarm and trouble conditions, and also during entry/exit delay periods. Provides acknowledgment tones when keys are pressed, and confirmation tones for successful command entries. OFF INSTANT MAXIMUM READY AWAY TEST CODE 0 STAY BYPASS CHIME # 6160RF-001-V1 PANIC KEY PAIR SPECIAL FUNCTION KEYS PANIC KEY PAIR PANIC KEY PAIR 6160RF Keypad/Transceiver (front door removed) TROUBLESHOOTING The error messages listed in the following table cause the keypad to produce a single ding tone. The table describes the error messages and the corrective actions. Display Corrective Action Low Bat (with Zone No.) 1. Replace the battery if the wireless transmitter has a replaceable battery. 2. Replace the transmitter if the wireless transmitter does not have a replaceable battery. Open Ckt Contact your Installer. Check 100 Contact your Installer. Home / Products / Honeywell 6160 Custom Alpha Security Keypad $119.95Quick OverviewShip out same day or within 24 hours Add to Wishlist
Honeywell 6160 Custom Alpha Security KeypadAdemco 6160 Easy to Read Alpha Display Keypad has a 32 character display with easy to read text that is spelled out in plain english. It features four oversized funtions keys which are accessible while the keypad door is closed. The four function keys on the left side of the keypad can be used for panic keys so that you may press these in case of an emergency such as a break in, fire or medical situation. The function keys are large, easily seen and accessible even when the front cover is closed. Specifications:Physical Current Wiring Compatibility Features:
6160 Installation manual How do I reset my Honeywell alarm keypad?How to Perform a Honeywell Security System Reset: Press and hold the action button at the top of the base station (in the middle) for about 30 seconds. The Base Station will ask if you are sure you want to perform a factory reset of the device.
How do you change the code on a Honeywell alarm keypad?How to change the master code of a Honeywell Alarm system. Press 8 (the CODE key).. Press 02.. Enter a new four-digit master code.. Re-enter the new code. The keypad will beep once to let you know that the code has been changed.. |