Gas tank for 5hp briggs and stratton engine

4112

Fuel Filter (5 of 394358)

$21.49

5044K

Fuel Cap (DIY Packaged Version)

$4.78

791867

Replacement Fuel Line

$11.99

5091K

Fuel Shut-Off Valve

$8.08

4171

Fuel Line Clamps (5 of 791580)

$11.29

4266

Fuel Filter Shop Pack

$32.99

592840

Fuel Shut Off Valve (Tank mount)

$32.49

5098K

Fuel Filter (DIY Packaged Version)

$5.07

794793

Tethered Fuel Tank Cap

$15.49

716111

Fuel Shut Off Valve

$30.99

690612

Fuel Filter/Glass Sediment Bowl

$19.49

4129

Fuel Filter (5 of 691035)

$25.30

791857

Fuel Line for 3.5 and 5 HP Industrial Plus Engines

$12.09

696142

Fuel Transfer Tube

$31.49

You can do exactly what you're talking about. Mainly, you just need to have the gas tank above the carb and let it gravity feed. I'm not sure exactly which carb you have, but most "pumped" carbs like what you're talking about is being done via a vacuum source. Not knowing exactly how this is with your carb, if you can find the diaphragm pump and block it from working, then put the gas above the carb, you should be able to run the carb you have now. You might even be able to do it without disabling the diaphragm pump.

If there is an issue with your carb and it doesn't work at all, you'd need to measure the base attachment area, the venturi opening, and bolt spacing, then cross reference that online to find what you're looking for. There are a lot of sites which sell carbs which also have these mounting specs for the carbs they sell. About the only way I can think of to get you what you're looking for. The only problem you might run into is if a carb you find is not big enough. This might keep it from producing maximum power. It really shouldn't be that big of an issue, though. You should be able to find something.

Pinterest

Watch

Explore

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

Explore

Home Decor

Save

From

youtube.com

Video by

donyboy73

on

youtube

·

Fuel Tank Replacement On Briggs & Stratton 4-5HP EnginesIn this video I show you how to easily install a fuel tank on a Briggs & Stratton engine.Buy diaphrag...

Lester Cook

19 followers

More information

Fuel Tank Replacement On Briggs & Stratton 4-5HP Engines - YouTube

Find this Pin and more on Gas tank by Lester Cook.

Repair Videos

Jack Stands

Engine Repair

Small Engine

Home Repairs

Briggs & Stratton

Gas Tanks

Mechanical Engineering

Repair And Maintenance

More information

Fuel Tank Replacement On Briggs & Stratton 4-5HP Engines - YouTube

Find this Pin and more on Gas tank by Lester Cook.

More like this

How many cc is a Briggs and Stratton 5hp motor?

This 163cc engine features 5.0 Gross Horse Power.

How do you fix a plastic gas tank?

To seal a plastic gas tank with epoxy glue, start by draining the tank and letting it dry. Then, sand the area around the hole or crack with coarse grit sandpaper, and clean it with a cloth soaked in rubbing alcohol. Next, mix the epoxy glue, apply it over the opening, and press a fiberglass patch over the epoxy.

What fuel does my Briggs and Stratton use?

All Briggs & Stratton engines can use up to, and including, 10% ethanol petrol. Always use clean, fresh, unleaded petrol with an octane rating of at least 77 for side-valve engines or at least 85 for overhead-valve engines.

Toplist

Latest post

TAGs